İzmir Kâtip Çelebi Ünivesitesi Slogan

Doç. Dr. Mücahit Sütçü

Pozisyon ve Görev Bilgileri


  • Malzeme Bilimi Mühendisliği Bölüm Başkan Yardımcısı
  • Malzeme Anabilim Dalı Öğretim Üyesi

Öğrenim Bilgileri


  • Doçentlik Üniversiteler Arası Kurul Başkanlığı-Mühendislik (Malzeme ve Metalurji Mühendisliği)
  • Doktora İzmir Yüksek Teknoloji Enstitüsü-Mühendislik ve Fen Bilimleri Enstitüsü - Makine Mühendisliği A.B.D.
  • Lisansüstü İzmir Yüksek Teknoloji Enstitüsü-Mühendislik ve Fen Bilimleri Enstitüsü - Malzeme Bilimi ve Mühendisliği A.B.D.
  • Üniversite Yıldız Teknik Üniversitesi-Kimya-Metalurji Fakültesi - Metalurji ve Malzeme Mühendisliği

Akademik Özgeçmiş


  • DAL SERKAN, SÜTÇÜ MÜCAHİT, GÖK MUSTAFA SABRİ, GENÇEL OSMAN,Characteristics of lightweight diatomite-based insulating firebricks, JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2020, 57, 184 191
  • TUNÇ IRMAK, EROL MUSTAFA, GÜNEŞ FETHULLAH, SÜTÇÜ MÜCAHİT,Growth of ZnO nanowires on carbon fibers for photocatalytic degradation of methylene blue aqueous solutions: An investigation on the optimization of processing parameters through response surface methodology/central composite design, CERAMICS INTERNATIONAL, 2020, 46, 7459 7474
  • GENÇEL OSMAN, ERDOĞMUŞ ERTUĞRUL, SÜTÇÜ MÜCAHİT, ÖREN OSMAN HULUSİ,Effects of concrete waste on characteristics of structural fired clay bricks, Construction and Building Materials, 2020, 255, 119362
  • YALAMAÇ EMRE, SÜTÇÜ MÜCAHİT, Ergani Elif Sıla,Effect of heat treatment parameters on the crystallization of feldspathic-based dental glass-ceramics, Journal of Asian Ceramic Societies, 2020, 1-9
  • Sürül Okan, BİLİR TURHAN, GHOLAMPOUR ALİAKBAR, SÜTÇÜ MÜCAHİT, Özbakkaloğlu Togay, GENÇEL OSMAN,Recycle of ground granulated blast furnace slag and fly ash on eco-friendly brick production, European Journal of Environmental and Civil Engineering, 2020, 1 - 19
  • Alptekin Hande,Arkan E.,CAN MUSTAFA, SÜTÇÜ MÜCAHİT, et al.,Water affinity guided tunable superhydrophobicity and optimized wettability of selected natural minerals, JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, 2019, 16, 199 211
  • ÖZTÜRK SAVAŞ,SÜTÇÜ MÜCAHİT,ERDOĞMUŞ ERTUĞRUL,GENÇEL OSMAN,Influence of tea waste concentration in the physical, mechanical and thermal properties of brick clay mixtures, CONSTRUCTION AND BUILDING MATERIALS, 2019, 217, 592 599
  • SÜTÇÜ MÜCAHİT,ERDOĞMUŞ ERTUĞRUL,GENÇEL OSMAN,GHOLAMPOUR ALİAKBAR,ATAN EBUBEKİR,Ozbakkaloglu Togay,Recycling of bottom ash and fly ash wastes in eco-friendly clay brick production, JOURNAL OF CLEANER PRODUCTION, 2019, 233, 753 764
  • YARAŞ ALİ,SÜTÇÜ MÜCAHİT,GENÇEL OSMAN,ERDOĞMUŞ ERTUĞRUL,Use of carbonation sludge in clay based building materials processing for eco-friendly, lightweight and thermal insulation, CONSTRUCTION AND BUILDING MATERIALS, 2019, 224, 57 65
  • KAYA NUSRET, ATAGÜR METEHAN, AKYÜZ ORHAN, SEKİ YOLDAŞ, SARIKANAT MEHMET, SÜTÇÜ MÜCAHİT, SEYDİBEYOĞLU MEHMET ÖZGÜR, SEVER KUTLAY,Fabrication and characterization of olive pomace filled PP composites, COMPOSITES PART B-ENGINEERING, 2018, 150, 277 283
  • KÜÇÜKDOĞAN NİLAY, AYDIN LEVENT, SÜTÇÜ MÜCAHİT,Theoretical and empirical thermal conductivity models of red mud filled polymer composites, THERMOCHIMICA ACTA, 2018, 665, 76 84
  • DİKİCİ TUNCAY, SÜTÇÜ MÜCAHİT,Effects of disc milling parameters on the physical properties and microstructural characteristics of Ti6Al4V powders, Journal of Alloys and Compounds, 2017, 723, 395 400
  • KÜÇÜKDOĞAN NİLAY, HALİS SERDAR, SÜTÇÜ MÜCAHİT, SARIKANAT MEHMET,SEKİ YOLDAŞ,SEVER KUTLAY,Kağıt üretim atığı katkılı yüksek yoğunluklu polietilen (YYPE) kompozitlerin mekanik özelliklerinin incelenmesi, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 2017, 23, 949 953
  • SÜTÇÜ MÜCAHİT, ÖZTÜRK SAVAŞ,YALAMAÇ EMRE,GENÇEL OSMAN,Effect of olive mill waste addition on the properties of porous fired clay bricks using Taguchi method, Journal of Environmental Management, 2016, 181, 185 192
  • GENÇEL OSMAN,del Coz Diaz Juan Jose, SÜTÇÜ MÜCAHİT, KÖKSAL FUAT,Alvarez Rabanal Felipe P,Gonzalo Martinez Barrera,A novel lightweight gypsum composite with diatomite and polypropylene fibers, Construction and Building Materials, 2016, 113, 732 740
  • KUCUKDOGAN NILAY,ÖZTÜRK SAVAŞ,SÜTÇÜ MÜCAHİT,Bio composites based on polypropylene filled with waste of camellia sinensis, Archives of Materials Science and Engineering, 2016, 79, 12 18
  • SÜTÇÜ MÜCAHİT, ALPTEKİN HANDE, ERDOĞMUŞ ERTUĞRUL,ER YUSUF,GENÇEL OSMAN,Characteristics of fired clay bricks with waste marble powder addition as building materials, Construction and Building Materials, 2015, 82, 1 8
  • SÜTÇÜ MÜCAHİT,Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks, Ceramics International, 2015, 41, 2819 2827
  • SÜTÇÜ MÜCAHİT, AKKURT SEDAT,Alternatif hammadde olarak kâğıt sanayi üretim atığı kullanılarak hafif refrakter izolasyon tuğlası geliştirilmesi, Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 2014, 14, 509 516
  • SÜTÇÜ MÜCAHİT, del Coz Diaz Juan Jose, Alvarez Rabanal Felipe Pedro,GENÇEL OSMAN,AKKURT SEDAT,Thermal performance optimization of hollow clay bricks made up of paper waste, Energy and Buildings, 2014, 75, 96 108
  • ÇAY VEDAT VELİ, SÜTÇÜ MÜCAHİT, GENÇEL OSMAN, KORKUT TURGAY,Neutron Radiation Tests about FeCr Slag and Natural Zeolite Loaded Brick Samples, Science and Technology of Nuclear Installations, 2014, 2014, 1 5
  • GENÇEL OSMAN,Juan Jose del Coz Diaz,SÜTÇÜ MÜCAHİT,KÖKSAL FUAT,Alvarez Rabanal Felipe Pedro,Martinez-Barrera Gonzalo,Brostow Witold,Properties of gypsum composites containing vermiculite and polypropylene fibers Numerical and experimental results, Energy and Buildings, 2014, 70, 135 144
  • GENÇEL OSMAN,SÜTÇÜ MÜCAHİT,ERDOĞMUŞ ERTUĞRUL,KOÇ VAHDETTİN,ÇAY VEDAT VELİ,GÖK MUSTAFA SABRİ,Properties of bricks with waste ferrochromium slag and zeolite, Journal of Cleaner Production, 2013, 59, 111 119
  • SÜTÇÜ MÜCAHİT, AKKURT SEDAT, Bayram Alican,Uluc Uluca,Production of anorthite refractory insulating firebrick from mixtures of clay and recycled paper waste with sawdust addition, Ceramics International, 2012, 38, 1033 1041
  • SÜTÇÜ MÜCAHİT, AKKURT SEDAT,Utilization of recycled paper processing residues and clay of different sources for the production of porous anorthite ceramics, Journal of the European Ceramic Society, 2010, 30, 1785 1793
  • SÜTÇÜ MÜCAHİT, AKKURT SEDAT, Okur Salih,A microstructural study of surface hydration on a magnesia refractory, Ceramics International, 2010, 36, 1731 1735
  • SÜTÇÜ MÜCAHİT, AKKURT SEDAT,The use of recycled paper processing residues in making porous brick with reduced thermal conductivity, Ceramics International, 2009, 35, 2625 2631
  • SÜTÇÜ MÜCAHİT, AKKURT SEDAT, Okur Salih,Influence of crystallographic orientation on hydration of MgO single crystals, Ceramics International, 2009, 35, 2571 2576
  • AKKURT SEDAT, SÜTÇÜ MÜCAHİT, Romagnoli Marcello,DOE and ANN models for powder mixture packing, AMERICAN CERAMIC SOCIETY BULLETIN, 2007, 86, 9101 11
  • SÜTÇÜ MÜCAHİT, AKKURT SEDAT,ANN model for prediction of powder packing, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2007, 27, 641 644
  • YALAMAÇ EMRE,SÜTÇÜ MÜCAHİT,ÇİDEM AYTAÇ,LİTYUM SİLİKAT CAM-SERAMİKLERİN KRİSTALİZASYONU VE KARAKTERİZASYONU,The International Conference on Materials Science, Mechanical and Automation Engineerings and Technology in CAPPADOCIA/TURKEY (IMSMATEC’19),,21.06.2019 - 23.06.2019, Nevşehir, TÜRKİYE, 2019
  • DAL SERKAN,SÜTÇÜ MÜCAHİT,GÖK MUSTAFA SABRİ,GENÇEL OSMAN,MICROSTRUCTURE AND PHYSICAL PROPERTIES OF CLAYEY-CERAMIC MATERIALS WITH LIGHTWEIGHT MINERAL ADDITIVES,The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in CAPPADOCIA/TURKEY (IMSMATEC’19), June 21-23 2019,21.06.2019 - 23.06.2019, Nevşehir, Türkiye, 2019
  • ŞAHİN CENK,SÜTÇÜ MÜCAHİT,İş kazası riskine yönelik çalışma ortamı ve demografik değişkenlerin belirleyici etkisinin incelenmesi.,4. Uluslararası İş Güvenliği ve Çalışan Sağlığı Kongresi,12.04.2019 13.04.2019, Ankara, TÜRKİYE, 14.04.2019
  • YARAŞ ALİ,ERDOĞMUŞ ERTUĞRUL,KOÇYİĞİT ŞERMİN,GENÇEL OSMAN,SÜTÇÜ MÜCAHİT,Physical properties of clay based brick with paper mill sludge and carbonation sludge.,4th International Engineering and Natural Sciences Conference (IENSC 2019),06.11.2019 - 08.11.2019, Diyarbakır, TÜRKİYE, 2019
  • GENÇEL OSMAN,YARAŞ ALİ,KOÇYİĞİT ŞERMİN,SÜTÇÜ MÜCAHİT,ERDOĞMUŞ ERTUĞRUL,Physical and mechanical properties of clay based bricks containing water treatment sludge.,4th International Engineering and Natural Sciences Conference (IENSC 2019),06.11.2019 - 08.11.2019, Diyarbakır, TÜRKİYE, 2019
  • ERDOĞMUŞ ERTUĞRUL,YARAŞ ALİ,KOÇYİĞİT ŞERMİN,SÜTÇÜ MÜCAHİT,GENÇEL OSMAN,Combined use of fly ash and marble powder in clay brick structure.,4th International Engineering and Natural Sciences Conference (IENSC 2019),06.11.2019 - 08.11.2019, Diyarbakır, TÜRKİYE, 2019
  • SÜTÇÜ MÜCAHİT, YARAŞ ALİ,GENÇEL OSMAN,ERDOĞMUŞ ERTUĞRUL,The use of carbonation sludge as pore former in clay bricks to improve insulation in construction applications,The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/Turkey (IMSMATEC 2019),21.06.2019 - 23.06.2019, Nevşehir, TÜRKİYE, 2019
  • KAYA VACİDE SELİN,SÜTÇÜ MÜCAHİT,Production of anorthite based ceramics from industrial food and ceramic processing wastes,International Conference on Research in Engineering, Technology and Science (ICRETS),03.02.2019 07.02.2019, Lizbon, PORTEKİZ, 2019
  • ERDOĞMUŞ ERTUĞRUL,SÜTÇÜ MÜCAHİT,GENÇEL OSMAN,KOÇYİĞİT ŞERMİN,Investigation of the usability of construction demolition wastes in the production of building bricks.,International Engineering and Natural Sciences Conference (IENSC 2018),14.11.2018 17.11.2018, Diyarbakır, TÜRKİYE, 17.11.2018
  • ERDOĞMUŞ ERTUĞRUL,SÜTÇÜ MÜCAHİT,GENÇEL OSMAN,ÇAY VEDAT VELİ,Characterization of clay based bricks with bottom ash and fly ash waste addition.,International Engineering and Natural Sciences Conference (IENSC 2018),14.11.2018 17.11.2018, Diyarbakır, TÜRKİYE, 17.11.2018
  • ERDOĞMUŞ ERTUĞRUL,SÜTÇÜ MÜCAHİT,GENÇEL OSMAN,Farklı tür cüruf katkılarının yapı tuğlasının fiziksel, mekanik ve mikroyapısal özelliklerine etkileri.,2nd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT 2018),19.10.2018 21.10.2018, Ankara, TÜRKİYE, 21.10.2018
  • Investıgatıon Of Rheologıcal Propertıes Of Three Dıfferent Partıcles Sızed 50 Sılıcon Carbıde (Sic) Loaded Polypropylene (Pp) Matrıx Based Composıtes,The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology,10.04.2018 12.04.2018, 12.04.2018
  • Investigation of rheological properties of waste tunsten carbide (WC) particles loaded high density polyethylene (HDPE) matrix based composites.,The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2018),10.04.2018 12.04.2018, İzmir, TÜRKİYE, 10.04.2018
  • A study on coatability of Seydişehir Bayer alumina powders by plasma spraying on aluminum alloy.,The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2018),10.04.2018 12.04.2018, 12.04.2018
  • Characterization of commercial machinable feldspathic based glass-ceramic blocks for dental Cad/Cam applications,The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2018),10.04.2018 12.04.2018, İzmir, TÜRKİYE, 12.04.2018
  • Characterization of anorthite based ceramics produced from sugar beet filter cake and clay mixtures,The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2018),10.04.2018 12.04.2018, 12.04.2018
  • Characterization of Al7075 alloy processed by Equal Channel Angular Pressing (ECAP),2nd International Students Science Congress,04.05.2018 05.05.2018, İzmir, TÜRKİYE, 05.05.2018
  • Production and characterization of lightweight and porous diatomite based refractories,3rd International Conference on Material Science and Technology in Cappadocia (IMSTEC 2018),17.09.2018 19.09.2018, Nevşehir, TÜRKİYE, 19.09.2018
  • Utilization of Sugar Beet Press Filter Cake in Different Ratios For Production of Calcium Alumina Silicate (CAS) Ceramic Bodies,IV. International Ceramic, Glass, Porcelain Enamel, Glaze and Pigment Congress (SERES 2018),10.10.2018 12.10.2018, Eskişehir, TÜRKİYE, 12.10.2018
  • Effect of heat treatment conditions on the crystallization of dental glass-ceramics,MANİSA CELAL BAYAR ÜNİVERSİTESİ (ÜSİTEM) 1.ULUSLARARASI ÜNİVERSİTE-SANAYİ İŞBİRLİĞİ, AR-GE VE İNOVASYON KONGRESİ,18.12.2017 19.12.2017, Manisa, 18.12.2017
  • Characterization of feldspathic based dental glass-ceramics,MANİSA CELAL BAYAR ÜNİVERSİTESİ (ÜSİTEM) 1.ULUSLARARASI ÜNİVERSİTE-SANAYİ İŞBİRLİĞİ, AR-GE VE İNOVASYON KONGRESİ,18.12.2017 19.12.2017, 18.12.2017
  • Effects of Red Mud Waste Addition on Properties of Fired Clay Bricks,2nd International Conference on Civil and Environmental Engineering (ICOCEE – Cappadocia 2017),08.05.2017 10.05.2017, Nevşehir, TÜRKİYE, 08.05.2017
  • The Use of Hazelnut Shell Wastes as Pore-Making Additive in Fired Clay Bricks,2nd International Conference on Civil and Environmental Engineering (ICOCEE – Cappadocia 2017),08.05.2017 10.05.2017, Nevşehir, TÜRKİYE, 08.05.2017
  • Characterization and modification of hollow mullite microspheres for the application of polymer-matrix composites.,International Porous and Powder Materials Symposium and Exhibition (PPM 2017),12.09.2017 15.09.2017, Kuşadası, Aydın, TÜRKİYE, 15.09.2017
  • Fabrication and characterization of fired clay bricks with paper processing waste and expanded perlite addition for building applications.,2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC 2017),11.10.2017 13.10.2017, Nevşehir, TÜRKİYE, 13.10.2017
  • Production and characterization of leucite based opaque porcelains fused to metals for dental restorations.,2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC 2017),11.10.2017 13.10.2017, Nevşehir, TÜRKİYE, 13.10.2017
  • Investigation thermal decomposition kinetics of ulexite/polypropylene composites: activation energies with thermogravimetric analysis.,5th International Polymeric Composites Symposium and Workshops (IPC 2017),02.11.2017 04.11.2017, İzmir, TÜRKİYE, 04.11.2017
  • Kolemanit/polipropilen kompozitlerin termal dekompozisyon kinetiğinin incelenmesi: termogravimetrik analiz ile aktivasyon enerjisinin hesaplanması.,5th International Polymeric Composites Symposium and Workshops (IPC 2017),02.11.2017 04.11.2017, İzmir, TÜRKİYE, 04.11.2017
  • Investıgation of Coating Performance of Bayer Process Alumina Powders on AA6063 Al Alloy with the Plasma Spray Method,16th International Materials Symposium (IMSP2016),12.10.2016 14.10.2016, 12.10.2016
  • Viscoelastic and mechanical properties of olive pomace filled Polypropylene PP composites,3rd International Conference on Thermophysical and Mechanical Properties of Advanced Materials(THERMAM 2016),01.09.2016 03.09.2016, İzmir, TÜRKİYE, 01.09.2016
  • Evaluation of thermal conductivity models and compressive strength of hollow ceramic microsphere fılled polyester matrix composites,16th International Materials Symposium (IMSP'2016),12.10.2016 14.10.2016, Denizli, TÜRKİYE, 28.12.2016
  • Effect of hollow ceramic microspheres on thermal conductivity models and compressive strength of epoxy composites,16th International Materials Symposium (IMSP'2016),12.10.2016 14.10.2016, Denizli, 28.12.2016
  • Kağıt üretim atığı katkılı yüksek yoğunluklu polietilen YYPE kompozitlerin mekanik özelliklerinin incelenmesi,16th International Materials Symposium (IMSP'2016),12.10.2016 14.10.2016, Denizli, TÜRKİYE, 28.12.2016
  • Bio composites based on polypropylene filled with waste of camellia sinensis,16th International Materials Symposium (IMSP'2016),12.10.2016 14.10.2016, Denizli, TÜRKİYE, 28.12.2016
  • Çamfıstığı kabuklarının tuğla üretiminde gözenek yapıcı olarak kullanılabilirliğinin incelenmesi,16th International Materials Symposium (IMSP'2016),12.10.2016 14.10.2016, Denizli, TÜRKİYE, 28.12.2016
  • Effect of binder clay additions on the sintering properties of fireclay refractory bricks,International Conference on Material Science and Technology in Cappadocia (IMSTEC’16),06.04.2016 08.04.2016, Nevşehir, TÜRKİYE, 05.05.2016
  • Investigation of the properties of vermiculite based bricks produced using a clay binder,International Conference on Material Science and Technology in Cappadocia (IMSTEC’16),06.04.2016 08.04.2016, Nevşehir, TÜRKİYE, 05.05.2016
  • Effect of vermiculite addition on the sintering properties of fireclay refractory bricks,International Conference on Material Science and Technology in Cappadocia (IMSTEC’16),06.04.2016 08.04.2016, Nevşehir, TÜRKİYE, 05.05.2016
  • Effect of sintering parameters on the mechanical properties of yttria stabilized zirconia ceramics,International Conference on Material Science and Technology in Cappadocia (IMSTEC’16),06.04.2016 08.04.2016, Nevşehir, TÜRKİYE, 05.05.2016
  • Fındıkkabuğu ve evsel çay atığı katkılı yüksek yoğunluklu polietilen kompozitlerin fiziksel ve mekaniksel özelliklerinin belirlenmesi.,XIX. Ulusal Mekanik Kongresi,24.08.2015 29.08.2015, Trabzon, TÜRKİYE, 01.12.2015
  • Pirina atığı katkılı termoplastik kompozitlerin termo-kinetik (gelimat) mikser ile üretimi.,XIX. Ulusal Mekanik Kongresi,24.08.2015 28.08.2015, Trabzon, TÜRKİYE, 01.12.2015
  • Tarımsal atık ile katkılanmış yüksek yoğunluklu polietilen kompozitlerin fiziksel, mekanik ve termal özelliklerinin belirlenmesi,XIX. Ulusal Mekanik Kongresi,24.08.2015 28.08.2015, Trabzon, TÜRKİYE, 01.12.2015
  • Evaluation of grinding parameters of bayer processed alumina powder by experimental design,International Porous and Powder Materials Symposium and Exhibition (PPM 2015),15.09.2015 18.09.2015, İzmir, TÜRKİYE, 15.09.2015
  • Utilization of eggshell waste as calcium source in the production of porous anorthite ceramics,International Porous and Powder Materials Symposium and Exhibition (PPM 2015),15.09.2015 18.09.2015, 15.09.2015
  • Investigation of tunable wetting properties of modified natural mineral powders,International Porous and Powder Materials Symposium and Exhibition (PPM 2015),15.09.2015 18.09.2015, İzmir, TÜRKİYE, 15.09.2015
  • An experimental design for the optimization of manufacturing process of porous bricks from olive mill waste,International Porous and Powder Materials Symposium and Exhibition (PPM 2015),15.09.2015 18.09.2015, İzmir, TÜRKİYE, 15.09.2015
  • Mikroalaşımlı vanadyum ve niobyum karbür içeren düşük karbonlu çeliklerin termo mekanik işlem sonrası iğnesel ferrit oluşumunun incelenmesi,IISS’12 International Iron Steel Symposium,02.04.2012 04.04.2012, Karabük, TÜRKİYE, 04.04.2012
  • ANN model for prediction of powder mixture packing,9th International Conference and Exhibition of the European Ceramic Society,19.06.2005 23.06.2005, Portoroz, SLOVENYA, 23.06.2005
  • Microstructural analysis of calcium carbonate scaling in geothermal wells of Menderes massive,Proceedings World Geothermal Congress 2010,25.04.2010 29.04.2010, Bali, ENDONEZYA
  • Harbour sediment remediation in vitrified ceramic bodies,10th International Conference and Exhibition of the European Ceramic Society,17.06.2007 21.06.2007, Berliln, ALMANYA
  • Alternatif hammadde olarak kâğıt sanayi üretim atığı kullanılarak hafif refrakter izolasyon tuğlası geliştirilmesi,VIII. Uluslararası Katılımlı Seramik Kongresi,22.11.2012 24.11.2012, Afyonkarahisar, TÜRKİYE
  • Isı yalıtım özellikleri iyileştirilmiş yapı tuğlalarının geliştirilmesinde kağıt üretim atıklarının kullanılması etkileri,X. Ulusal Tesisat Mühendisliği Kongresi ve Teskon+Sodex Fuarı, Binalarda Enerji Performansı Sempozyumu,13.04.2011 16.04.2011, İzmir, TÜRKİYE
  • Kağıt sanayii atık çamurlarının değişik tuğla bünyelerinde değerlendirilmesi,VII. Uluslararası Katılımlı Seramik Kongresi, Kongre Bildiriler Kitabı,26.11.2008 28.11.2008, Afyonkarahisar, TÜRKİYE
  • Koruma amaçlı horasan harcı hazırlanmasında kullanılacak ticari killerin kullanım koşullarının araştırılması,11. Ulusal Kil Sempozyumu,02.09.2003 05.09.2003, İzmir, TÜRKİYE
  • Boksit içerikli elektriksel porselenlerin üretimi ve karakterizasyonu,11. Ulusal Kil Sempozyumu,02.09.2003 05.09.2003, İzmir, TÜRKİYE
  • Investigation of mullite formation parameters using experimental design,IX. Uluslararası Katılımlı Seramik Kongresi,26.11.2015 28.11.2015, Afyonkarahisar, TÜRKİYE
  • An investigation of mineralogical humidity and gas adsorbing properties of some natural minerals,International Porous and Powder Materials Symposium and Exhibition (PPM 2013),03.09.2013 06.09.2013, İzmir, TÜRKİYE
  • ÖZTÜRK SAVAŞ,SÜTÇÜ MÜCAHİT,AYDIN LEVENT,GENÇEL OSMAN, Designing Engineering Structures using Stochastic Optimization Methods, Book Chapter 16: Thermal Optimization of Lightweight and Micro-porous Clay Bricks for Building Applications., ISBN:9780367255190, Taylor Francis / CRC Press, 2020
  • KÜÇÜKDOĞAN NİLAY,SÜTÇÜ MÜCAHİT,ÖZTÜRK SAVAŞ,AYDIN LEVENT,KAYABAŞI ERHAN,Sayı Harun, The Most Recent Studies in Science and Art (Volume 2), Chapter 145. Thermal degradation behavior and flame retardancy of organic and inorganic filled polymer composites., ISBN:978-605-288-357-0, S:1854 1865, Gece Publishing, 2018
  • KÜÇÜKDOĞAN NİLAY,AYDIN LEVENT,ÖZTÜRK SAVAŞ,SÜTÇÜ MÜCAHİT, The Most Recent Studies in Science and Art. (Volume 2), Chapter 143. Thermal conductivity of hetero-phase polymer composites, ISBN:978-605-288-357-0, S:1836 1843, Gece Publishing, 2018
  • KÜÇÜKDOĞAN NİLAY, SÜTÇÜ MÜCAHİT, ÖZTÜRK SAVAŞ,Savran Melih, The Most Recent Studies in Science and Art (Volume 2), Chapter 144. An Evaluation of the Current Status of Pulp and Paper Mill Sludge for Industrial Applications, ISBN:978-605-288-357-0, S:1844 1853, Gece Publishing, 2018
  • YALAMAÇ EMRE, SÜTÇÜ MÜCAHİT, BAŞTÜRK SUAT BAHAR, Fiber Technology for Fiber Reinforced Composites, Chapter 9: Ceramic Fibers, ISBN:9780081018712, S:187 207, Woodhead Publishing Series, 2017
  • (2019), (The use of recycled paper processing residues in making porous brick with reduced thermal conductivity)
  • (2019), (Characteristics of fired clay bricks with waste marble powder addition as building materials)
  • (2019), (Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks)
  • (2018), (A novel lightweight gypsum composite with diatomite and polypropylene fibers)
  • (2018), (Effect of olive mill waste addition on the properties of porous fired clay bricks using Taguchi method)
  • (2018), (Utilization of recycled paper processing residues and clay of different sources for the production of porous anorthite ceramics)
  • (2018), (The use of recycled paper processing residues in making porous brick with reduced thermal conductivity)
  • (2018), (Properties of gypsum composites containing vermiculite and polypropylene fibers Numerical and experimental results)
  • (2018), (ANN model for prediction of powder packing)
  • (2018), (Production of anorthite refractory insulating firebrick from mixtures of clay and recycled paper waste with sawdust addition)
  • (2018), (Characteristics of fired clay bricks with waste marble powder addition as building materials)
  • (2018), (Thermal performance optimization of hollow clay bricks made up of paper waste)
  • (2018), (Properties of bricks with waste ferrochromium slag and zeolite)
  • (2018), (Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks)
  • (2018), (Effects of disc milling parameters on the physical properties and microstructural characteristics of Ti6Al4V powders)
  • (2018), (Neutron Radiation Tests about FeCr Slag and Natural Zeolite Loaded Brick Samples)
  • (2017), (Properties of bricks with waste ferrochromium slag and zeolite)
  • (2017), (Thermal performance optimization of hollow clay bricks made up of paper waste)
  • (2017), (A novel lightweight gypsum composite with diatomite and polypropylene fibers)
  • (2017), (Influence of crystallographic orientation on hydration of MgO single crystals)
  • (2017), (Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks)
  • (2017), (Production of anorthite refractory insulating firebrick from mixtures of clay and recycled paper waste with sawdust addition)
  • (2017), (Characteristics of fired clay bricks with waste marble powder addition as building materials)
  • (2017), (The use of recycled paper processing residues in making porous brick with reduced thermal conductivity)
  • (2017), (Properties of gypsum composites containing vermiculite and polypropylene fibers Numerical and experimental results)
  • (2017), (Utilization of recycled paper processing residues and clay of different sources for the production of porous anorthite ceramics)
  • (2017), (Effect of olive mill waste addition on the properties of porous fired clay bricks using Taguchi method)
  • (2016), (Characteristics of fired clay bricks with waste marble powder addition as building materials)
  • (2016), (Properties of gypsum composites containing vermiculite and polypropylene fibers Numerical and experimental results)
  • (2016), (Effect of olive mill waste addition on the properties of porous fired clay bricks using Taguchi method)
  • (2016), (Thermal performance optimization of hollow clay bricks made up of paper waste)
  • (2016), (Utilization of recycled paper processing residues and clay of different sources for the production of porous anorthite ceramics)
  • (2016), (Influence of crystallographic orientation on hydration of MgO single crystals)
  • (2016), (Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks)
  • (2016), (The use of recycled paper processing residues in making porous brick with reduced thermal conductivity)
  • (2016), (Production of anorthite refractory insulating firebrick from mixtures of clay and recycled paper waste with sawdust addition)
  • (2016), (Properties of bricks with waste ferrochromium slag and zeolite)
  • (2015), (Utilization of recycled paper processing residues and clay of different sources for the production of porous anorthite ceramics)
  • (2015), (Characteristics of fired clay bricks with waste marble powder addition as building materials)
  • (2015), (A microstructural study of surface hydration on a magnesia refractory)
  • (2015), (Production of anorthite refractory insulating firebrick from mixtures of clay and recycled paper waste with sawdust addition)
  • (2015), (Thermal performance optimization of hollow clay bricks made up of paper waste)
  • (2015), (Properties of bricks with waste ferrochromium slag and zeolite)
  • (2015), (Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks)
  • (2015), (Properties of gypsum composites containing vermiculite and polypropylene fibers Numerical and experimental results)
  • (2015), (Influence of crystallographic orientation on hydration of MgO single crystals)
  • (2015), (The use of recycled paper processing residues in making porous brick with reduced thermal conductivity)
  • Endüstriyel proses atık katkılı polimer kompozitlerin alev geciktirme ve mekanik özelliklerinin incelenmesi, Yürütücü, İzmir Katip Çelebi Üniversitesi 2017-TDR-FEBE-0037, BAP, Yürütücü,,27.5.2020
  • Dişçilik uygulamalarında kullanılan Cad/Cam sistemleriyle işlenebilir feldspatik esaslı cam-seramik blokların üretim süreçlerinin belirlenmesi ve geliştirilmesi, Proje Danışmanı, 1507 KOBİ Ar-Ge Başlangıç- 7170336, TÜBİTAK Destekli Proje, Proje Danışmanı,,21.6.2019
  • Dişçilikte kullanılan metal destekli alt yapılar için yeni nesil opak porselen tozunun geliştirilmesi ve üretim süreçlerinin belirlenmesi (OPAK TR) , Proje Danışmanı, 1507 KOBİ Ar-Ge Başlangıç Programı 7150200, TÜBİTAK Destekli Proje, Proje Danışmanı, (329000),3.8.2017
  • Mineral Katkılı Termoplastik Kompozit Malzemelerin Üretilmesi ve Özelliklerinin İncelenmesi, Araştırmacı, BAP, Araştırmacı, (16213),10.6.2017
  • TÜBİTAK 3001-Üzüm bağ çubuğu ve prina atıkları ile katkılı polimer esaslı kompozitlerin üretimi ve özelliklerinin geliştirilmesi, Araştırmacı, 214M350, TÜBİTAK Destekli Proje, Araştırmacı, (60000),16.2.2017
  • Eş kanallı açısal presleme EKAP yöntemiyle nanokristal yapılı Ti6Al4V alaşımının üretilerek mekanik özelliklerinin geliştirilmesi ve biyomedikal uygulamaları, Araştırmacı, İzmir Katip Çelebi Üniversitesi 2013-2-FMBP-39, BAP, Araştırmacı, (92240),1.12.2016
  • Ortopedik Amaçlı Kemik Rahatsızlıklarının Tedavisine Yönelik Yapay Kemik Tasarımı, Araştırmacı, İzmir Katip Çelebi Üniversitesi 2013-2-FMBP-42, BAP, Araştırmacı,,24.3.2016
  • Isı yalıtım amaçlı hafif tuğla yapı malzemelerinin geliştirilmesinde tarımsal ve endüstriyel atıkların kullanılabilirliğinin araştırılması, Yürütücü, İzmir Katip Çelebi Üniversitesi 2013-2-FMBP-29, BAP, Yürütücü, (71599),30.12.2015
  • Elektriksel İletken Biyopolimer Nanokompozitlerin Üretimi ve Elektriksel Mekanik ve Viskoelastik Özelliklerinin İncelenmesi, Araştırmacı, İzmir Katip Çelebi Üniversitesi 2013-2-FMBP-50, BAP, Araştırmacı,,15.9.2015
  • Genleştirilmiş vermikülit diatomit ve şamot kili içeren hafif refrakter izolasyon tuğlalarının geliştirilmesi ve özelliklerinin incelenmesi, Araştırmacı, Bartın Üniversitesi 2012-2-64, BAP, Araştırmacı, (3000),9.4.2014
  • Kağıt sanayii atık çamuru katkısıyla yüksek ısı yalıtımı sağlayan tuğlaların geliştirilmesi, Araştırmacı, 2009 IYTE 07, BAP, Araştırmacı, (5000),31.12.2009
  • Tarihi horasan harcı hazırlanmasında kullanılacak pişirilmiş killerin kullanım koşullarının araştırılması, Araştırmacı, 2003 IYTE 17, BAP, Araştırmacı, (3000),31.12.2003
  • İzmir körfez çamurunun yapı tuğlası üretiminde katkı maddesi olarak kullanılması, Araştırmacı, 2003 IYTE 28, BAP, Araştırmacı, (5000),31.12.2003
  • Yerel ve veya ithal bayer alüminadan yüksek mekanik özelliklerde seramik fayans geliştirilmesi, Araştırmacı, 2002 IYTE 07, BAP, Araştırmacı, (1800),1.1.2003
  • TÜBİTAK 1501 Sanayi Ar-Ge Projeleri Destekleme Programı- 3190847: “Parlatma Hattından Çıkan Atık Çamurun Geri Kazanımı”, Proje Danışmanı, TEYDEB 1501- 3190847, TÜBİTAK Destekli Proje, Proje Danışmanı
  • Bartın Üniversitesi BAP 2018-FEN-A-019: İnşaat yıkıntı atıklarının yapı tuğlası üretiminde kullanılabilirliğinin incelenmesi, Araştırmacı, BAP, Araştırmacı
  • İzmir Katip Çelebi Üniversitesi Merkezi Araştırma Laboratuvarı Altyapı Projesi, Araştırmacı, 2014K120490, BAP, Araştırmacı, (12000000)
  • Mineral Katkılı Termoplastik Kompozit Malzemelerin Üretilmesi ve Özelliklerinin İncelenmesi, Araştırmacı, İzmir Katip Çelebi Üniversitesi 2015-ÖDL-MÜMF-0002, BAP, Araştırmacı, (16213)
  • Yüksek fırın cürufu katkılı köpük beton geliştirilmesi ve özelliklerinin incelenmesi, Araştırmacı, Bartın Üniversitesi 2017-1, BAP, Araştırmacı
  • Dental uygulamalar için işlenebilir zirkonya blokların geliştirilmesi, Danışman, Atlas-Enta Dişçilik San.Tic.A.Ş., Özel Kuruluşlar, Danışman
  • İşlenebilir Lösit Esaslı Cam-Seramiklerin Üretilmesi ve Karakterizasyonu, Araştırmacı, Manisa CBÜ-BAP 2017-091, BAP, Araştırmacı
  • CONSTRUCTION AND BUILDING MATERIALS
  • JOURNAL OF MATERIALS IN CIVIL ENGINEERING
  • CONSTRUCTION AND BUILDING MATERIALS
  • WASTE MANAGEMENT
  • CERAMICS INTERNATIONAL
  • JOURNAL OF CLEANER PRODUCTION
  • Journal of Porous Materials
  • APPLIED CLAY SCIENCE
  • Advances in in Civil Engineering Materials
  • JOURNAL OF CLEANER PRODUCTION
  • WASTE AND BIOMASS VOLARIZATION
  • Bartın Üniversitesi Mühendislik ve Teknoloji Bilimleri Dergisi
  • Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi
  • CONSTRUCTION AND BUILDING MATERIALS
  • Experimental and mathematical modeling studies on thermoplastic composites filled with organic and inorganic residues, NİLAY KÜÇÜKDOĞAN, İzmir Katip Çelebi Üniversitesi, Tamamlanmış
  • DENTAL UYGULAMALAR İÇİN İŞLENEBİLİR LİTYUM SİLİKATCAM-SERAMİK BLOKLARIN ÜRETİMİ VE KARAKTERİZASYONU, AYTAÇ ÇİDEM, Manisa Celal Bayar Üniversitesi Fen Bilimleri Enstitüsü Metalurji ve Malzeme Mühendisliği Anabilim Dalı, Devam eden
  • DEVELOPMENT OF MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF ALUMINUM ALLOYS BY EQUAL CHANNEL ANGULAR PRESSING (ECAP) PROCESS, MEHMET MAHSUN YEŞİL, İzmir Katip Çelebi Üniversitesi Fen Bilimleri Enstitüsü, Malzeme Bilimi ve Mühendisliği Anabilim Dalı, Tamamlanmış
  • İŞLENEBİLİR LÖSİT ESASLI CAM-SERAMİKLERİN ÜRETİMİ VE KARAKTERİZASYONU, ELİF SILA ERGANİ, Manisa Celal Bayar Üniversitesi Fen Bilimleri Enstitüsü Metalurji ve Malzeme Mühendisliği Anabilim Dalı, Tamamlanmış
  • Çalışanlarda iş kazası riskine yönelik çalışma ortamı ve demografik değişkenlerin belirleyici etkisinin incelenmesi, CENK ŞAHİN, İzmir Katip Çelebi Üniversitesi Fen Bilimleri Enstitüsü İş Sağlığı ve Güvenliği Anabilim Dalı, Tamamlanmış
  • CHARACTERIZATION OF CLAY BRICK MATERIALS PRODUCED WITH RED MUD AND NUT SHELL WASTES FOR BUILDING APPLICATIONS, ATA SADIK ÇAM, İzmir Katip Çelebi Üniversitesi Fen Bilimleri Enstitüsü Makine Mühendisliği Anabilim Dalı, Tamamlanmış
  • Dental uygulamalar için opak porselen toz üretimi ve karakterizasyonu, GÖZDE TÜNAYDIN, Dokuz Eylül Üniversitesi Fen Bilimleri Enstitüsü Metalurji ve Malzeme Mühendisliği Anabilim Dalı, Tamamlanmış
  • Investigation of tunable wetting properties of modified natural mineral powders, HANDE ALPTEKİN, İzmir Katip Çelebi Üniversitesi Fen Bilimleri Enstitüsü Malzeme Bilimi ve Mühendisliği Anabilim Dalı, Tamamlanmış
  • Hafif refrakter izolasyon tuğlalarının geliştirilmesi ve özelliklerinin incelenmesi, SERKAN DAL, Bartın Üniversitesi Fen Bilimleri Enstitüsü Metalurji ve Malzeme Mühendisliği Anabilim Dalı, Tamamlanmış
  • Production of zirconia-based ceramic composite materials for dental applications and investigation of their sintering behaviors, Mehmet Çağan Sarı, Devam eden
  • Development of lightweight dense/porous bi-layered ceramic tiles produced by using pore-forming additives and double charge pressing method, Taner Erdoğan, İzmir Katip Çelebi Üniversitesi Fen Bilimleri Enstitüsü, Malzeme Bilimi ve Mühendisliği Anabilim Dalı, Devam eden
  • Production and characterization of anorthite and gehlenite ceramics from different domestic raw materials, VACİDE SELİN KAYA, İzmir Katip Çelebi Üniversitesi, Devam eden
  • 2017 Akademik Yılı Bilimsel Ödül Belgesi,2018
  • 2016 Yılı Akademik Faaliyet Ödülü (100 Akademik Teşvik Puanı Teşekkür Belgesi),2017
  • 2016 Yılı Akademik Faaliyetlerinde Fakülte Birinciliği, Teşekkür Belgesi,2017
  • Bilimsel Yayın Onur Ödülü,2015
  • Uluslararası Bilimsel Yayınları Teşvik Ödülü,2015
  • Yurtdışı Öğretim Üyesi Destekleme Bursu,2013
  • İYTE Vakfı Uluslararası Bilimsel Yayınları Teşvik Ödülü,2010
  • İYTE VII. Ne Üretelim? Etkinlikleri ve Proje Yarışması, İkincilik Ödülü,2008
  • Bölüm Başkan Yardımcısı, İzmir Katip Çelebi Üniversitesi, 1.3.2017
  • Fakülte Kurulu Üyesi, İzmir Katip Çelebi Üniversitesi, 16.7.2012-16.7.2015
  • Konferans, 3rd International Conference on Material Science and Technology in Cappadocia (IMSTEC 2018), Kurul üyesi, Nevsehir, 2018
  • Konferans, The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2018), Düzenleyici, Çeşme/İzmir, 2018
  • Konferans, 2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC 2017), Kurul üyesi, Nevsehir, 2017

Araştırma Alanları

  • Mühendislik Temel Alanı
  • Malzeme Ve Metalurji Mühendisliği

Dersler

Menüyü Kapat